Become a part of our community!
Subscribe to our news and mailing lists and be aware of all the news and discounts. Our new promotions and opportunities will always be with you just a click away.
Join and live in the same rhythm with us!
This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
0
0
PART #3092455004TH21
10 reviews | Write a review
The Rattler TS25-384 is a perfect addition to any hunter's arsenal. Equipped with a 25mm germanium lens and a 384x288 resolution thermal sensor, this unit has a detection range of 880 yards, and a base magnification of 1.5X. This low base magnification allows for a wide field of view, which many hog hunters prefer, as it allows them to see and track multiple animals in a group at once. The Rattler series of thermal scopes were specifically designed to be compact and lightweight, as this not only ensures its small footprint can be used on a multitude of shooting platforms, but also gives the series secondary use as a thermal monocular as well.
This unit also comes packed with all the features that many Rattler users have come to expect, which include: built-in recording and picture capture capabilities, Wi-Fi hotspot, 8X digital zoom, Picture-in-picture, AGM Connect app compatibility for storing and sharing images and videos, one-shot digital zeroing process, 4.5 hours of battery life on (2) CR123 batteries, external power capability through the unit’s USB-C plug and a high-quality American Defense Manufacturing quick detach mount which quickly allows users to seamlessly shift from riflescope to monocular quickly and easily.
Warning: California's Proposition 65
Detector type: 17μm, Uncooled, 50Hz
Refresh rate: Sensor 50 Hz / OLED 50 Hz
Resolution: 384x288
FOV: 14.9° x 11.2°
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
$2,194.00
$2,085.00
Quick Order
Add to cart
Shock and vibration
750 g/ms
Picture In Picture Mode (PIP)
Yes
Digital Magnification
1.5x - 12x
Detector type
17μm, Uncooled, 50Hz
Standby Mode
Yes
Resolution
384x288
Detection Range (6' object)
1250m/yd
Snapshot
Yes
Lens system
25 mm; F/1.0
Field of view (H × X)
14.9° x 11.2°
Digital zoom
2x, 4x, 8x, PIP
Eye relief
45 mm
Imaging palettes
Jungle, Recognition
Display
0.39-inch, OLED, 1024 × 768
Storage
Built-in EMMC (16 GB)
Record Video
Yes
Battery Type
Two CR123A (3V) Lithium or two RCR123 (up to 4.2V) Rechargeable Batteries
Wi-Fi
Yes
Battery Life (Operating)
Up to 4.5 hr
External power supply
5V USB
Operating Temperature Range
-20°C to +55°C (-4°F to +131°F)
Degree of Protection
IP67
Weight
0.41 kg ( 0.91 lb)
Overall Dimensions
187.2 × 62.5 × 59.2 mm (7.37 × 2.46 × 2.33 in)
Magnification
1.5x
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE:
Do not open the DAV or BIN file on your computer as it may corrupt the file.
WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
1. Connect the thermal device to your PC with USB cable.
2. Turn on the thermal device.
3. Disable the Wi-Fi Hotspot function in the device menu if WiFi is enabled.
4. Open the detected disk (USB drive) in file manager program. Copy the unzipped .dav file and paste it to the root directory of the device.
5. Turn off the device.
6. Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription "Upgrading ...". The update process will be completed when the inscription "Upgrading ..." goes out.
Repeat steps 4-6 for each updating file.
7. Turn off the device and disconnect it from your PC.
Before downloading the firmware files, you should be registering properly on our official website to get the best support.
Please check the latest firmware. Click the FW Version to download the firmware update package.
AGM RATTLER TS25-384 / AGM RATTLER TS35-384
Firmware Versions:
- Fixed an issue when updating firmware on some devices that could result in a solid screen and buttons not working.
- Support 1-10 levels
of brightness and contrast adjustment.
- Support m/yard
display for distance measurement.
- The Trajectory
function is deleted.
- Zeroing Profiles are
added. Freeze/zoom/decimal points are added to the zero process.
- The original position of reticle is saved without jumping when
zooming.
- Digital Zoom display
(TS25-384: 1.5X - 3X - 6X - 12X; TS35-384: 2X - 4X - 8X - 16X)
- Ukrainian is added
in the Language menu
Fixed the following defect:
The black reticle shows red in the app. (be normal in the device)
- Support "Freeze" function during zeroing.
- Support auto power off function.
- Added PIP quick start button: Press MODE button.
- Added black color for reticles.
- Reticles display in PIP for T-Vision and recording files.
- Support auto power off function.
- Added PIP quick start button: Press MODE button.
- Added black color for reticles.
- Reticles display in PIP for T-Vision and recording files.
- The software changes were made only in the part concerning the clip-on device.
- Reticle firmware_0A52710102_Curs_EN
- FPGA firmware_V1.0.1_210309
- The name of Boresighting menu is changed to “Reticle”.
- Cursor names are changed from “Boresighting” to “Reticle”.
- Fixed the reticle color saving.
- Introduced new reticle patterns.
- Only Reticle 1 supports trajectory function.
- The scope or clip-on device type is automatically detected to install the corresponding software version.
- New crosshair patterns in Boresighting menu.
- Trajectory Correction function supports only Boresighting 1 cursor type.
- The reticle display and crosshair color are retained after turning off the device.
- Trajectory synchronization is maintained across various digital zoom.
- The image quality has been improved.
- Reticles are updated.
- Repacked firmware. All the features keep the same.
- Basic version.
- Trajectory Correction function supports all reticles.
Total Reviews (10)
click here write review to add review for this product.
PART NO.: 6306SMR1
$156.00