AGM Adder TS35-384

Name: AGM Adder TS35-384
Brand: AGM
SKU: 3142455005DTL1
Price: 2634.0000 USD
Availability: InStock
Rating: 5 (4 reviews)

Thermal Weapon Sights

PART #3142455005DTL1

4 reviews | Write a review

Description And features

The AGM Adder Thermal Riflescopes pack all the technology and advanced electronics into the historically familiar 30mm tube riflescope housing. The Adder TS35-384 pairs a 35mm Germanium lens with an upgraded sub-35mK 384x288 thermal detector and a 1024x768 OLED display, to provide one of the best images AGM has produced to date. The combination of the 12 micron sensor with the 35mm lens also raises the base magnification of this particular model to 3X. Unlike smaller lenses with larger microns, this combination allows predator hunters to start at a higher base magnification, which eliminates the inevitable degradation of the resolution that is required for low base magnification units. Other enhancements include an astonishing 15 hours of battery life on two internal 18650 rechargeable batteries, 5 internal reticle options, and shot-activated video recording, which, when enabled, ensure that hunters forgetting to press the record button is a thing of the past!

The entire Adder product family also comes with a high-quality, one-piece, 30mm quick-detach mount from American Defense Manufacturing. These mounts allow for sliding the scope both forward and backwards to provide optimal eye relief for shooters using a wide array of different shooting platforms. Other features include, but aren’t limited to: 50 Hz refresh rate, IP67 waterproof rating, external power capability, 64GB of on-board memory, 5 different reticle options, Wi-Fi and AGM Connect app compatibility, multiple color palettes, audio recording, emergency CR123 battery power, and of course AGM’s 5 Year Transferable Warranty.

Warning: California's Proposition 65

384×288 thermal resolution
12μm high-sensitivity detector
Fast 50 Hz imaging
High-resolution OLED display
1x, 2x, 4x, 8x digital zoom
On-board video and audio recording
Shot Activated Recording (SAR)
Wi-Fi data transmission
Fast 64GB EMMC built-in storage
Various reticle types and colors
Adjustable color palettes
Standby mode
Waterproof & Shockproof
Dual power system
Up to 15 hours continuous working
External power supply capability
5-Year warranty

Characteristics

Refresh rate: 50 Hz

Resolution: 384x288

FOV: 7.5° × 5.6°

Downloads

Data Sheet

User Manual

Export Restrictions:

Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.

$2,634.00

Compare

Quick Order

Add to cart

Specifications

Magnification

3× - 24×

Palettes

Black Hot, White Hot, Red Hot, Fusion

Reticle

5 types, 4 colors, on/off

Boresight Adjustment

Digital Controlled

Boresight Increment

0.13 mil / 0.44 MOA

Distance Measurement

Yes (Stadiametric)

Scene Mode

Jungle, Recognition

Picture In Picture Mode (PIP)

Yes

Video Recording

Yes

Defective Pixels Correction (DPC)

Yes

Uniformity Correction

Auto, Manual, External Correction

Digital Magnification

Detector type

12μm, Uncooled, 50 Hz, < 35 mK (25°C, F# = 1.0)

Standby Mode

Yes

Resolution

384 × 288

Detection Range (6' object)

1800 m/yd

Snapshot

Yes

Lens system

35 mm; F/1.0

Field of view (H × X)

7.5° × 5.6°

Digital zoom

1×, 2×, 4×, 8×

Diopter adjustment range

-5 to +5 dpt

Eye relief

≥ 60 mm

Display

1024×768, 50 Hz, OLED

Storage

64 GB EMMC

Battery Type

Two 18650 Rechargeable Batteries (built-in) and one CR123 Battery

Wi-Fi

Yes

CVBS Output

Yes (via USB)

Battery Life (Operating)

Up to 15 hr

Power supply

5 VDC/2 A, USB Type-C Supports QC3.0

Operating Temperature Range

-30°C to +55°C (-22°F to +131°F)

Degree of Protection

IP67

Weight

890 g ( 1.96 lb)

Overall Dimensions

407 × 78× 76 mm (16.0 × 3.1 × 3.0 in)

Firmware update

FIRMWARE UPDATE INSTRUCTION

Please read the instructions below before updating the firmware.

Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.

Download the firmware update package to your PC and unzip it.

NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.

Connect the thermal device to your PC with USB cable.
Turn on the thermal device.
Disable the Wi-Fi Hotspot function in the device menu if WiFi is enabled.
Open the detected disk (USB drive) in file manager program. Copy the unzipped .dav file and paste it to the root directory of the device.
Turn off the device.
Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription "Upgrading ...". The update process will be completed when the inscription "Upgrading ..." goes out. Repeat steps 4-6 for each updating file.
Turn off the device and disconnect it from your PC.

WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.

If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.

To begin the procedure for updating the firmware of your equipment, you must confirm that you are familiar with and agree to the "AGM GLOBAL VISION" Export Policy («AGM GLOBAL VISION» Export Policy). By continuing the process of updating your device, you are confirming that you received this device legally and in compliance with all applicable US export laws and that you are not on the Banned Persons List and/or are not affiliated with any of the Banned Persons as defined by the US Government.
If these conditions are met, please check the box on the left and follow the instructions for updating the hardware firmware.

Please check the latest firmware. Click the FW Version to download the firmware update package.

AGM ADDER TS35-384 / AGM ADDER TS50-384 THERMAL IMAGING SCOPES FIRMWARE

Firmware Versions:
- V5.5.53_231025
  # Support 10 reticles.
  # The small cross won’t overlay on the reticle when you choose the reticle type. It only appears when you adjust the XY value, to mark the reticle’s original position.
  # When a 5-second power-off countdown appears, pressing any buttons can cancel the power off operation. Accidental touches that trigger power off process won’t be a problem.
  # Support Auto FFC Prompt. Before the device performs auto FFC, a 5-second countdown will appear to notify users of the incoming frozen image.

Reviews Over AGM Adder TS35-384

Average Rating:

Total Reviews (4)
click here write review to add review for this product.

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Michael Williams

Review Title: Adder TS35-384 “Thermal Excellence”!

Review Add on: 03/03/2023
Average Rating:

I recently upgraded my coyote hunting game with the purchase of the AGM Adder TS35-384. What a huge leap from the night vision setup I was using before. This scope is awesome and excels in almost every way over its competitors in the same price range. I have truly enjoyed my short time with this device and consider it money well spent. It is the perfect scope for my entry into the thermal category. AGM stands behind their products as well. I had questions about upgrading the firmware on the Adder and reached out to their customer service via Messenger chat. It was after hours and because of that I didn’t even communicate what I needed in the message attempt. An AGM representative messaged me the very next morning to see if they could help me in any way. The representative answered all my questions and was a pleasure to speak with as well. AGM is a solid company and worthy of your investment if you’re in the market for a new optic device.

Value :
Quality :
Appearance :
Accuracy :
Performance :

Author: Bill Webb

Review Title: Scope line

Review Add on: 11/01/2023
Average Rating:

I don't own one of your scope's but from what I read and see here, WOW, they are super nice. The function and clarity is nice, easy to use and very clear, crisp viewing of any object. Any one of these would be great to put on my, 306 Remington 760 pump or on my, bolt 300 Winchester Magnum.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Kevin

Review Title: Super impressed

Review Add on: 08/01/2023
Average Rating:

Had the adder out a few times and am very pleased with the performance and battery life. Very easy to use and very nice picture. I will definitely recommend to others. Also customer service has been awesome the one time I got a hold of them. If there was one issue it would be the side turret can be bumped and change your reticle pretty easily.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Greg Tomlinson

Review Title: TS365-384 Adder

Review Add on: 13/12/2022
Average Rating:

I am in love with this scope. Easy to setup and operate. Easy to sight it with just a shot or two. Menu wheel is easy to use and navigate. Best thermal for the money in my opinion. Only complaint would be at night it's hard to find the record or palette button. Usually end up turning off the scope. But otherwise, I'm very happy with my purchase.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Optional Equipment

AGM-2116 ADM QR Mount

PART NO.: 63061161

$263.00

QUICK ORDER