Become a part of our community!
Subscribe to our news and mailing lists and be aware of all the news and discounts. Our new promotions and opportunities will always be with you just a click away.
Join and live in the same rhythm with us!
This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
0
0
PART #3093451001AM30
1 reviews | Write a review
The Asp-Micro handheld observational thermal monocular is equipped with a 160×120 or 384×288 infrared detector and a 720×540 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness. The monocular is mainly applied to scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, antismuggling, criminal seizing, hiking, travel, and hunting, etc.
Warning: California's Proposition 65
FUNCTIONS:
Distance Measurement:
The device realizes distance measurement function after marking
the top and bottom of target, and input the target height.
Hot Spot Mark:
The device detects and marks the hot spot of highest temperature.
Mode Switch:
Device supports pallet switch and distance measurement.
Storage:
Built-in memory module supports video recording/snapshot
capturing.
Digital Zoom:
Device supports 1×, 2×, 4× and 8x digital zoom.
Wi-Fi Hotspot:
Device can capture snapshots, record videos, and set parameters
via APP after being connected to your phone.
Warning: California's Proposition 65
Detector type: Vanadium Oxide Uncooled Focal Plane Arrays
Refresh rate: 50 Hz
Resolution: 384x288
FOV: 24.7° x 18.7°
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
Digital Magnification
0.5x - 4x
Detector type
Vanadium Oxide Uncooled Focal Plane Arrays
Response Waveband
8μm to 14μm
FFC (Flat Field Correction)
Auto, Manual, External Correction
Highest Temperature Spot Tracking
Yes
Standby Mode
Yes
Refresh rate
50 Hz
Aperture
F1.0
Resolution
384×288
Recognition
(Vehicles: 1.4×4.0m) - 369m/yd (Humans: 1.8×0.5m) - 120m/yd
Detection Range (6' object)
(Vehicles: 1.4×4.0m) - 1479m/yd (Humans: 1.8×0.5m) - 482m/yd
Identification Range
(Vehicles: 1.4×4.0m) - 184m/yd (Humans: 1.8×0.5m) - 60m/yd
NETD
less than 35 mk (@25°C), F#=1.0
Lens (focal length)
15 mm
Field of view (H × X)
24.7° x 18.7°
Digital zoom
1×, 2×, 4×, 8x
Display
720×540, 0.2 inch, LCOS
Storage
Built-in memory module (8 GB)
Record Video
On-board video recording
Capture Snapshot
Yes
Battery Type
Built-in rechargeable Lithium battery
Wi-Fi
Yes
Battery Operating Time
More than 7 hours continuous running (with Wi-Fi hotspot function off)
Battery Capacity Display
Yes
Power supply
5 VDC/2 A, 1.5 W
Operating Temperature Range
-20°C to 55°C (-4°F to 131°F)
Weight
0.25 kg (0.55 lb)
Overall Dimensions
161 × 61 × 57 mm (6.3 × 2.4 × 2.2 in)
Protection Level
IP67
Magnification
0.5x
FIRMWARE UPDATE INSTRUCTION
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.
WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
Please check the latest firmware. Click the FW Version to download the firmware update package.
ASP-MICRO TM384 THERMAL MONOCULAR FIRMWARE
Firmware Versions:
- Repacked firmware.
All the features keep the same.
- Basic version.
Total Reviews (1)
click here write review to add review for this product.