AGM ASP-MICRO TM160

Thermal imaging

PART #3093251001AM10

11 reviews | Write a review

Description And features

The Asp-Micro handheld observational thermal monocular is equipped with a 160×120 infrared detector and a 720×540 LCOS display. It supports functions of observation, highest-temperature target tracking, distance measurement, Wi-Fi hotspot, and more. The high-sensitivity built-in thermal detector provides a clear view even in total darkness. The monocular is mainly used in scenarios such as patrolling, law enforcement, search-and-rescue, drug enforcement, anti-smuggling, hiking, and hunting.

AGM ASP Micro Overview. Read more at TheFirearmBlog

FUNCTIONS:

Distance Measurement:
The device realizes distance measurement function after marking the top and bottom of target, and input the target height.
Hot Spot Mark:
The device detects and marks the hot spot of highest temperature.
Mode Switch:
Device supports pallet switch and distance measurement.
Storage:
Built-in memory module supports video recording/snapshot capturing.
Digital Zoom:
Device supports 1×, 2×, and 4× digital zoom.
Wi-Fi Hotspot:
Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone.

Warning: California's Proposition 65

160×120 resolution, high sensitivity detector
Adaptive AGC, DDE, 3D DNR
720×540 resolution LCOS display
Built-in rechargeable Lithium battery
More than 10 hours continuous running (with Wi-Fi hotspot function off)
Wi-Fi hotspot
Type-C interface
3-Year warranty

Characteristics

Detector type: Vanadium Oxide Uncooled Focal Plane Arrays

Refresh rate: Sensor 25 Hz

Resolution: 160x120

FOV: 24.7° x 18.7°

Package Includes

USB Cable
Wrist Strap
Packing Box
Operators Manual
Lens Tissue
EU PLug

Downloads

Data Sheet

User Manual

Export Restrictions:

Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.

$439.00

Compare

Quick Order

Add to cart

Specifications

Magnification

0.5x - 2x

Detector type

Vanadium Oxide Uncooled Focal Plane Arrays

Response Waveband

8μm to 14μm

FFC (Flat Field Correction)

Auto, Manual, External Correction

Highest Temperature Spot Tracking

Yes

Standby Mode

Yes

Refresh rate

Sensor 25 Hz / OLED 50 Hz

Aperture

F1.1

Resolution

160×120

Detection Range (6' object)

250 m/yd

NETD

less than 35 mk (@25°C), F#=1.1

Lens (focal length)

6.2 mm

Field of view (H × X)

24.7° x 18.7°

Digital zoom

1×, 2×, 4×

Display

720×540, 0.2 inch, LCOS

Storage

Built-in memory module (8 GB)

Record Video

On-board video recording

Capture Snapshot

Yes

Battery Type

Built-in rechargeable Lithium battery

Wi-Fi

Yes

Battery Operating Time

Up to 10 hours

Battery Capacity Display

Yes

Power supply

5 VDC/2 A, 1.5 W

Operating Temperature Range

-20°C to 55°C (-4°F to 131°F)

Weight

0.25 kg (0.55 lb)

Overall Dimensions

161 × 61 × 57 mm (6.3 × 2.4 × 2.2 in)

Protection Level

IP67

Firmware update

FIRMWARE UPDATE INSTRUCTION

Please read the instructions below before updating the firmware.

Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.

Download the firmware update package to your PC and unzip it.

NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.

Connect the thermal device to your PC with USB cable.
Turn on the thermal device.
Disable the Wi-Fi Hotspot function in the device menu if WiFi is enabled.
Open the detected disk (USB drive) in file manager program. Copy the unzipped .dav file and paste it to the root directory of the device.
Turn off the device.
Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription "Upgrading ...". The update process will be completed when the inscription "Upgrading ..." goes out. Repeat steps 4-6 for each updating file.
Turn off the device and disconnect it from your PC.

WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.

If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.

To begin the procedure for updating the firmware of your equipment, you must confirm that you are familiar with and agree to the "AGM GLOBAL VISION" Export Policy («AGM GLOBAL VISION» Export Policy). By continuing the process of updating your device, you are confirming that you received this device legally and in compliance with all applicable US export laws and that you are not on the Banned Persons List and/or are not affiliated with any of the Banned Persons as defined by the US Government.
If these conditions are met, please check the box on the left and follow the instructions for updating the hardware firmware.

Please check the latest firmware. Click the FW Version to download the firmware update package.

ASP-MICRO TM160 THERMAL MONOCULAR FIRMWARE

Firmware Versions:
- V5.5.41_220713
  - Repacked firmware. All the features keep the same.
- V5.5.38_220322
  - Repacked firmware. All the features keep the same.
  - FPGA FW integrated into Main FW
- V5.5.37_220112
  - Updated FPGA FW
  - Improve image quality.
  - Support "Auto Power Off."
  - Support "Time Sync."
  - Support "Burn-Prevention."
- V5.4.24_210927
  - Repacked firmware. All the features keep the same.

72.73%
18.18%
0%
9.09%
0%

Reviews Over AGM ASP-MICRO TM160

Average Rating:

Total Reviews (11)
click here write review to add review for this product.

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Keith McGowan

Review Title: Good budget unit, great customer service!

Review Add on: 08/10/2022
Average Rating:

I was given a TM-160 in February this year for my birthday. For a $350 thermal camera? You're getting a good deal. I can easily detect other people out to 100-150yds in cold weather and 75-100 in warmer weather. The resolution isn't fantastic but is still very usable at short range. Of course, some sacrifices have to be made for a budget thermal unit so I can give that a pass. The tripod mount somehow broke one night and much to my surprise, it totaled the scope. I sent in an RMA about one month ago, and the engineers and returns team were able to replace the whole unit at no cost to me. I don't usually write reviews, but the customer service when my device did fail was phenomenal and I felt the need to leave a review. If you keep the limitations of the lower resolution and shorter range in mind and have realistic expectations for a $350 camera? I think anyone who's interested in getting into thermal imaging but doesn't want to drop $750-$1000+ will be quite pleased with the results.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Mike Parie

Review Title: Wicked Cool Thermal

Review Add on: 28/09/2022
Average Rating:

I tried gen 1 NVG, Ive tried digital night vision as well
each has its own issues
this is by far the best available option
no more IR emitters to worry about or drag alone

sadly the 160x120 is a low resolution for maybe 100yards max
better at under 50 yards

I wish there was a green mode to simulate NVG
I find that when I remove my eye from the monocular I lose all natural night vision ability since my eye was over powered by the screen

my fears are replacing the battery when it finally goes, how long will agm provide support is the real question to how well of a value this thermal is

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Ryan

Review Title: Light

Review Add on: 21/08/2022
Average Rating:

Worked good and had good vision when looking threw brush.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Richard Kloc

Review Title: As Advertised

Review Add on: 26/11/2021
Average Rating:

I wanted a small inexpensive thermal unit I could use to identify heat signatures. I didn't need to be able to identify what the heat signature was. I only need to know if there is an animal out there. I then switch over to my ATN night vision scope mounted on a 5.56 AR-15. The NV scope and the rifle weigh about 13lbs. That is too much weight to scan the countryside. The info about the unit is up front about the fact that this is a short range thermal unit. I am not disappointed. I can see the heat signature of deer out to about 300yds. I can see a coyote out to about 200yds. Of course I can't tell what those heat signatures are, but I can identify them with the night vision. This unit fit perfectly with what I was looking for. Battery life has been good. It's easy to hold. The menus are intuitive. The software to view on my smart phone works as it should, The Manual is easy to understand. I would buy this unit again.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Sharp Shooter

Review Title: Nice

Review Add on: 02/06/2021
Average Rating:

This is very perfect device. Thank You.

Value :
Quality :
Appearance :
Accuracy :
Performance :

Author: BEN ODELL

Review Title: Great Value For Relatively Low Cost

Review Add on: 02/02/2021
Average Rating:

Effective and good enough visual output. Just remember to use the little knob on the side to focus the picture. I use this for acquiring movement when I'm feral hog hunting at night with a rifle mounted thermal night vision scope (DS Arms FAL .308 with a thermal night vision scope... Very heavy setup.). It's a lot easier to handle this light monocular to detect movement and when you do, switch over to your rifle with a thermal or other night vision scope that has better resolution and a reticle. This makes hunting feral hogs at night much easier. I wish I had found it sooner! Great product and great price. Can't go wrong. Read the directions and you won't have any trouble and you won't be disappointed as long as you don't expect it to work like a $2,000 unit. Acquire movement. Then switch to main machinery!

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Taylor Moore

Review Title: Not worth it

Review Add on: 29/10/2020
Average Rating:

The thermal accuity is great, but you cant make out anything past 30 yards. Its super blurry, if i had to buy it again i wouldnt id save my money and go with a more expensive one that you can identify stuff at 100 yards or more

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Richard Carey

Review Title: Very cool

Review Add on: 10/10/2020
Average Rating:

Very cool device! I chose a model for a gift so that it was good quality and relatively inexpensive in terms of price. I gave a thermal imaging camera as a gift and now I bought the same one.