This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
0
0
PART #26218411
0 reviews | Write a review
AGM 10130 Series 18 mm Gen 3 Image Intensifiers are designed for use in all variants of the AN/PVS-7 type night vision goggles and night
vision clip on systems. Each of these Image Intensifiers features a high-efficiency gallium arsenide photocathode bonded to a glass
input window, a Microchannel Plate electron amplifier and P-43 (green) or P-45 (white) phosphor screen on a non-inverting fiberoptic output window. AGM IIT offers high signal-to-noise ratio and
high resolution which in turn provide user with extended detection range along with excellent identification in low-light conditions. AGM
IITs are equipped with Auto-Gated power supply for top performance in dynamic lighting environments.
AGM 10130 Series 18 mm Gen 3 Image Intensifiers can be used in night vision devices such as PVS-7, FoxBat-LE, Comanche-22, along
with number of other systems available on consumer market. AGM 10130-F2000 IITs are designed to give optimal performance while being in compliance with FOM 2000 export requirements.
Warning: California's Proposition 65
Spot Size (mkm) | MAXIMUM SPOTS ALLOWED IN EACH ZONE | ||
---|---|---|---|
Zone 1 | Zone 2 | Zone 3 | |
>150 or larger | 0 | 0 | 0 |
> 120 – 150 | 0 | 0 | 0 |
> 90 – 120 | 0 | 0 | 0 |
> 60 – 90 | 0 | 1 | 2 |
30 – 60 | 1 | 2 | 3 |
Total Spots | 3 spots maximum allowed |
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
Total Reviews (0)
click here write review to add review for this product.