This product is not exportable outside the United States.


By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.

close-icon

AGM AUTO-GATED MX10130-F2000 IIT

AGM Image intensifier Tubes

PART #26218311

0 reviews | Write a review


Description And features


AGM MX10130 Series 18mm Gen 3 Image Intensifiers are designed for use in all variants of the AN/PVS-7 type night vision goggles and night vision clip on systems. Each of these Image Intensifiers features a high-efficiency gallium arsenide photocathode bonded to a glass input window, a Microchannel Plate electron amplifier and P-43 (green) phosphor screen on a non-inverting fiber-optic output window. AGM IIT offers high signal-to-noise ratio and high resolution which in turn provide user with extended detection range along with excellent identification in low-light conditions. AGM IITs are equipped with Auto-Gated power supply for top performance in dynamic lighting environments.
AGM 10130 Series 18mm Gen 3 Image Intensifiers can be used in night vision devices such as PVS-7, along with number of other systems available on consumer market.
AGM 10130-F2000 IITs are designed to give optimal performance while being in compliance with FOM 2000 export requirements.
AGM 3AL1 F2000 – Gen 3 green phosphor tube (P-43) with resolution ranging over 64 lp/mm. 3AL1 is the highest resolution and the cleanest Gen 3 IIT offered by AGM. There are practically no visible spots in Zone 1

 

MAXIMUM SPOTS ALLOWED IN EACH ZONE

Spot Size
(micrometers)     
Zone 1       Zone 2      Zone 3   
>300 0 0 0
230 – 300 0 0 0
150 – 230 0 1 1
75 – 150 0 2 2
<75 Minimal Minimal Minimal

 

Zone 1 - 5.6 mm diameter circle in center of optic.
Zone 2 - 5.6 mm to 14.7 mm annulus concentric with Zone 1.
Zone 3 - 14.7 mm to edge annulus concentric with Zone 2.

Warning: California's Proposition 65

Downloads
Export Restrictions:

Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.


Specifications


Generation IIT
Gen 3 AL1 P-43 (Green) Part# 26218311
Resolution, lp/mm
64 min
Photocathode Sensitivity
2000- @2856º K, μA/lm / 100- @880 nm mA/W
Signal-to-Noise Ratio
28.2 - for Resolution of 64 lp/mm / 25 - for Resolution of 72 lp/mm
FOM
1800 - 2000 (min - max)
Halo, mm
1.0
EBI, µlx
0.25
Luminous Gain, fL/fc ( @ 2 x 10-6 fc )
Minimum - 50,000 / Maximum - 80,000 / – GENERATION 3 under 2 x 10-5lx input light level/illumination
Maximum Output Brightness, fL ( @ 1 and 20 fc )
Minimum 2.8 / Maximum 4.2
MTF (minimum)
@2.5 lp/mm - Info only / @7.5 lp/mm - Info only / @15.0 lp/mm - 61% / @25.0 lp/mm - 38%
Photocathode Diameter, mm
17.5
Operation temperature
(2 hours maximum) -55°C to +52°C
Storage Temperature
-51°C to +65°C - 8 hours -35°C to +35°C - long term
Power Supply
Auto-gated
Reliability, Hours
10000

  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over AGM AUTO-GATED MX10130-F2000 IIT

Total Reviews (0)
click here write review to add review for this product.