AGM Adder V2 LRF 60-1280

Please check the latest firmware. Click the FW Version to download the firmware update package.

• AGM EVOLVER LRF 1280, AGM Adder V2 LRF 35-384, AGM Adder V2 LRF 35-640, AGM Adder V2 LRF 50-640, AGM Adder V2 LRF 60-1280, AGM Spectrum LRF 4K

  Firmware Versions:

  • AGM_V5.5.124_250607

    KEY Feature Updates

    1. Image Boost 3.0

    Improved algorithm with reduced noise and enhanced target highlighting. (Only on AdderV2 now.)

    2. Reticle & Ballistics

     Thinner reticle for higher precision (with thinner reticle – reticle 6 & smaller dot – reticle 10).

     All features, interface, and operation methods under the Zeroing menu are update to the latest.

    Support the Reticle center color (4 colors).

     Ballistic Calculation Updates. The BC function will move under the Zeroing menu. Add bullet types

    (G1, G7, GS), aim point colors and types on Evolver and Spectrum.

     BC supports pitch angle compensation. The device can automatically adjust the position of the BC

    mark by reading the pitch angle data from the gyroscope and entering it into the algorithm

     BC aim point is shrunk and reduces the obscuration of the target.

     The BC aim point will be shown in the PIP view.

    *Note: To prevent the large reticle in the PIP view from obscuring the target and the aim point, only

    the reticle center will be retained in the PIP view, but reticle types 5, 6, and 10 will not be changed.

    3. LRF Display: LRF reading now shows in the screen center and will disappear after 10 seconds.

    If the distance measurement fails or cannot reach a valid value, “000” will be displayed.

    The LRF display is different when the reticle is enabled and disabled to avoid obscuring the target.

    b. Other updates

    1. The folder name on PC will be updated from “DCIM” to “AGM Content.”

    2. Update the boot screen and watermark to the new AGM logo.

    3. OSD Icons Simplification: SD card capacity, zoom magnifier icon, and USB mode icon removed.

    4. Support the Horizontal Distance measurement function.

    5. Power Saving. The hotspot will automatically turn off if no connection for 10 minutes.

    6. Only supports single ranging when ballistic calculations are enabled.

    7. Add Zoom Mode function(AdderV2 and Spectrum LRF 4K). Step Zoom (1X, 2X, 4X, 8X) is now back.

    Support switching between Step Zoom and Incremental Zoom

    8. Support the Red and Green Monochrome palettes on Evolver.

    9. Support the Channel Viewing Activation for 6 palettes on Evolver.

    10. Update the option names in Scene Mode for Evolver and AdderV2. Change “Recognition” to

    “General”; “Jungle” to “Compressed”.

    11. Add a new language: Turkish.

    12. Support the Diagnostic Log function.

    13. Support the Reboot and Restore Factory Settings function. (Restore is renamed as Reboot)

    14. SD card storage capacity will be displayed in the Version.

    15. No scanning alert will pop up when the device is connected to the computer.

    16. Optimize Evolver and AdderV2-1280 image horizontal lines problem.

    17. Fix bugs, like the watermark exceeding the boundary on AdderV2-35mm.

• AGM Rattler V3 LRF 35-384, AGM Rattler V3 LRF 35-640, AGM Rattler V3 LRF 50-640, AGM EVOLVER LRF 1280, AGM Adder V2 LRF 35-384, AGM Adder V2 LRF 35-640, AGM Adder V2 LRF 50-640, AGM Adder V2 LRF 60-1280

  Firmware Versions:

  • V5.5.148_260227
    【Update Details】 The following updates are different between models. Some models may already support this feature. This update is for function alignment to keep consistent. Due to hardware limitations and other factors, certain models do not support specific features. Please refer to the actual test. a. KEY Feature Updates 1. Image Boost 4.0 (Supported by AdderV2 & RattlerV3 series now.) Improved update with a new Self-Adaptive Image Algorithm ✓ Add an “Auto” mode in Scene Mode. The algorithm will perform the following adaptations in this mode. ① Automatic Scene Differentiation and Style Adaptation The algorithm now automatically distinguishes between urban outdoor scenes (with many buildings, like storefronts), indoor exhibition lighting scenes, and real outdoor hunting environments, adapting the display style accordingly. ② Distinction Between High Energy and Low Temperature Difference Scenes In high-energy scenes (e.g., sunny days after sunlight exposure, scenes with many buildings or richly detailed targets), there was previously a noticeable black edge around the target. This issue will be addressed by applying sharpening adjustments after scene recognition to reduce the edge effect. In scenes with low temperature differences (e.g., pure grassland or forest scenes), detail enhancement will be applied to improve clarity and visibility. 2. Image Boost 3.0 (Supported by Evolver LRF 1280.) Improved algorithm with reduced noise and enhanced target highlighting. 3. Reticle & Ballistics ✓ Add reticle Opacity adjustment option. There are a total of 5 gear levels. ✓ Only RattlerV3: Unify the existing functions and update them to the latest version. ① The BC aim point will be shown in the PIP view. *Note: To prevent the large reticle in the PIP view from obscuring the target and the aim point, only the reticle center will be retained in the PIP view, but reticle types 5, 6, and 10 will not be changed. ② BC aim point is shrunk and reduces the obscuration of the target. ③ BC supports pitch angle compensation. The device can automatically adjust the position of the ④ BC mark by reading the pitch angle data from the gyroscope and entering it into the algorithm ⑤ Thinner reticle for higher precision (with thinner reticle – reticle 6 & smaller dot – reticle 10). ⑥ All features, interface, and operation methods under the Zeroing menu are updated to the latest. 4. LRF Display Update (In the Laser Ranging Option) ✓ Supports changing the LRF Box styles. Add the Rangefinding Reticle Style option in the Laser Ranging. Two new styles have been added, making a total of three styles. ✓ Supports changing the LRF Box colors. Add the Rangefinding Reticle Color option in the Laser Ranging. Three new colors have been added, making a total of four colors. (Red, Green, White, and Black) ✓ Only RattlerV3 for function alignment: LRF reading now shows in the screen center and will disappear after 10 seconds. If the distance measurement fails or cannot reach a valid value, “000” will be displayed. The LRF display is different when the reticle is enabled and disabled to avoid obscuring the target. 5. Privacy and Device Security Updates (CE-RED Directive Update) ✓ Add Remote Access function This function was previously enabled by default. It has been added as a setting in the menu in this version. Only when it is enabled can users connect the App to the device. Upon first startup after firmware update, the device will display a setup prompt to enable or disable the Remote Access function. You can also enter the menu and navigate to Advanced Settings > General Settings > Remote Access to enable or disable the function. ✓ Add Screen Lock Function You can now set a passcode to lock the device screen and prevent unauthorized access. The Screen Lock function is off by default. You can enter the menu and go to Advanced Settings > General Settings > Passcode to enable it. When the passcode function is enabled, you can customize a 4-digit numeric passcode in the configuration interface. By setting that up, you need to enter the passcode when the device is powered on or woken up from standby mode. If you forget the passcode, you can hold the Capture button to reset it on the lock screen. This operation requires a factory reset to the device The screen lock passcode will be erased when you reset the device. ✓ Now the device won’t show itself as a USB disk connecting to the PC when it’s off or the screen is locked. ✓ Add Security Version & Redline info on the Advanced Settings > General Settings > Version Page. b. Other updates 1. Update the 1280 model horizontal line issue optimization algorithm. 2. The folder name on PC will be updated from “DCIM” to “AGM Content” on RattlerV3. 3. Fix some bugs to improve usability, like below. ✓ Fix – Arc-shaped line/whitening issue in the lower part of the image caused by heat haze. ✓ Fix – Dense white spots appearing in moving scenes. ✓ Fix – The update has caused the ballistic calculation to be turned off by default.