AGM ASP TM25-384

Thermal imaging

PART #3093451006AS21

4 reviews | Write a review

Description And features

The Asp TM-384 handheld observational thermal monocular is equipped with a 384 × 288 infrared detector and a 1024×768 OLED display. It supports functions of observation, hot spot tracking, distance measurement, Wi-Fi hot spot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness. The monocular is mainly applied to scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, anti-smuggling, criminal seizing, hiking, travel, and hunting, etc. FUNCTIONS Distance Measurement:The device realizes distance measurement function after marking the top and bottom of target, and input the target height. Hot Spot Mark:The device detects and marks the hot spot of highest temperature. Wi-Fi & Hot Spot:Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone. Mode Switch: Device supports pallet switch and distance measurement. Storage: Built-in memory module supports video recording/snapshot capturing. Digital Zoom:Device supports 1× and 2× digital zoom.

Warning: California's Proposition 65

384 × 288 resolution, high sensitivity detector
Adaptive AGC, DDE, 3D DNR, NETD less than 35 mk (@25°C), F#=1.0
1024 × 768 resolution 0.39-inch OLED display
Built-in rechargeable Li-ion battery
Up to five hours continuous running (with Wi-Fi hot spot function off)
Wi-Fi hot spot/ Limited 3-Year Warranty

Characteristics

Detector type: FLIR Tau 2 17μm Uncooled Microbolometer

Refresh rate: 50 Hz

Resolution: 384x288

FOV: 14.88° x 11.19°

Package Includes

USB Cable
Neck Lanyard
Protective Bag
Operators Manual
Lens Tissue

Downloads

Data Sheet

User Manual

Sold out

Specifications

Digital Magnification

1.5x - 3x

Image sensor

Vanadium Oxide Uncooled Focal Plane Arrays

Max. Resolution

384*288

Detector Pitch

17μm

Recognition

(Vehicles: 1.4×4.0m) - 616yd (Humans: 1.8×0.5m) - 201yd

Detection Range (6' object)

(Vehicles: 1.4×4.0m) - 2466yd (Humans: 1.8×0.5m) - 803yd

Identification Range

(Vehicles: 1.4×4.0m) - 308yd (Humans: 1.8×0.5m) - 100yd

Response Wavebond

8μm to 14μm

NETD

< 35mk(@25°C,F#=1.0)

Lens (focal length)

25mm

Field of view (H × X)

14.88° x 11.19°

F number

1.0

Digital zoom

1x, 2X

Monitor

0.39-inch, OLED, 1024 × 768

Hot Track

Yes

Imaging palettes

Black hot, White hot, Red hot, Fusion

Storage

Built-in memory module (16GB)

Record Video

Support on-board video recording

Capture Snapshot

Yes

Battery Type

Lithium Battery

Wi-Fi

Yes

Battery Operating Time

Up to 5 hours continuous running

Battery Capacity Display

Yes

Power supply

5V DC/2A, 2W

Weight

460 g (1.01 lb)

Working Temperature/ Humidity

-30 °C to 55 °C (-22 °F to 131 °F)

Overall Dimensions

189 mm × 74 mm × 66 mm (7.9″ × 2.91″ × 2.60″)

Protection Level

IP67

Magnification

1.5x

Firmware update

FIRMWARE UPDATE INSTRUCTION

Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.

NOTE:
Do not open the DAV or BIN file on your computer as it may corrupt the file.

WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.

1. Connect the thermal device to your PC with USB cable.
2. Turn on the thermal device.
3. Disable the Wi-Fi Hotspot function in the device menu if WiFi is enabled.
4. Open the detected disk (USB drive) in file manager program. Copy the unzipped .dav file and paste it to the root directory of the device.
5. Turn off the device.
6. Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription "Upgrading ...". The update process will be completed when the inscription "Upgrading ..." goes out.
Repeat steps 4-6 for each updating file.
7. Turn off the device and disconnect it from your PC.

Before downloading the firmware files, you should be registering properly on our official website to get the best support.

To begin the procedure for updating the firmware of your equipment, you must confirm that you are familiar with and agree to the "AGM GLOBAL VISION" Export Policy («AGM GLOBAL VISION» Export Policy). By continuing the process of updating your device, you are confirming that you received this device legally and in compliance with all applicable US export laws and that you are not on the Banned Persons List and/or are not affiliated with any of the Banned Persons as defined by the US Government.
If these conditions are met, please check the box on the left and follow the instructions for updating the hardware firmware.

Please check the latest firmware. Click the FW Version to download the firmware update package.

ASP TM25-384/TM35-384 THERMAL MONOCULAR FIRMWARE

Firmware Versions:
- V5.4.12_190709
  - Basic version.

Reviews Over AGM ASP TM25-384

Average Rating:

Total Reviews (4)
click here write review to add review for this product.

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Michael Hansen

Review Title: Awsome performance

Review Add on: 07/04/2021
Average Rating:

I am highly impressed with this device. Can detect humans from other heat sources out to about 400 meters using a combination of shape and movement pattern. At 200 meters, body shape is visible, confirming sighting. The high definition display works like a traditional night vision device as well, showing most vegetation, building structure etc. Device is NOT affected by high contrast lighting - situations where a light amplification device may be blinded by car headlights, strong urban lighting.

25mm device appear to be ideal compromise between having a decent wide field of view - and being able to classify heat sources at a distance.

Color pallettes are useful. Normally 'Black Hot' is best for things living, but found it useless for fire detection. Fires would be large, black patches looking like shadows. The otherwise rather ugly 'Fusion' pallette is useful here, showing a bright yellow for fires, giving more temperature difference awareness than the black/white pallettes.

Appearance :
Performance :
Accuracy :
Quality :
Value :

Author: Torben Jensen

Review Title: Perfect in good weather condition and very poor in fog and rain

Review Add on: 07/02/2021
Average Rating:

I have had the TM25-384 for a year now and have mixed feelings - in perfect weather condition it is brilliant - clear and sharp but it is extremely sensitive to fog and rain. I know thermal equipment is struggling in bad weather, but I have tried similar priced unit perform better in bad weather conditions. My next unit will not be a AGM.

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Daniel

Review Title: good thing

Review Add on: 29/10/2020
Average Rating:

It is a good monocular, lies comfortably in your hand, gives a good view. I am glad that there is wifi, I can connect it to the phone and then watch everything that has happened. The problem is that it is, as I already think, very expensive. It may be a justified price, but I have so far found other monoculars on the website with features that are cheaper by an average of 300 dollars. It would be good to compare their quality and functions.

Accuracy :
Performance :
Appearance :
Quality :
Value :

Author: Rob

Review Title: Great product, great service

Review Add on: 03/07/2020
Average Rating:

This product has exceeded my expectations in every way. This is the second unit I own, the first was from the first batch and had a programming error which was promptly corrected. I am elated with not only the operation of this unit, but the service I received post purchase. I would definitely make this purchase again if the need arises. I had written a much more detailed review, but apparently the system thinks I am to verbose. If interested in more info, I will attempt to post on their facebook page. I am excited to be able to sing the praises of this unit and this company. Thank you Todd, Thank you Trent for all your help and dilligence!!

Accuracy :
Performance :
Appearance :
Quality :
Value :

Optional Equipment

AGM Power Bank

PART NO.: 6308APB1

$43.00

QUICK ORDER