This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
0
0
PART #ADDE60-1280-2
1 reviews | Write a review
The AGM AdderV2 LRF 60-1280 exemplifies the peak in modern day electro-optical development. Just a few short years ago, doubling the resolution of some of the most high-end 640 resolution riflescopes was unheard of. Now, AGM is proud to bring its first ever 1280x1024 resolution thermal device to the market in an incredibly sleek traditional 30mm tube design.
Although bringing attention to the sensor alone should be enough to grab most shooter’s attention, that wouldn’t do justice to all the other included improvements inside this unit. It also packs a well-disguised 1000m laser rangefinder neatly tucked into the germanium lens assembly, as well as an incredible crisp new high resolution 2560x2560 display. These combine to provide the most detailed thermal image that AGM has ever produced. The 60mm lens is the perfect size as its not too big to make mounting difficult on different weapons platforms, but its still large enough to raise the base magnification to a perfect 2.5X. Like all Adder V2 models, this unit will have the ability to change from step zoom (doubling the magnification each press of the button) to an 0.5X incremental zoom, so that there are no large gaps in the zoom range that shooters cannot take advantage of.
User’s will also be quick to notice the new semi-circular display that lies within the viewing area. This will give users a more traditional scope feel when viewing through the device, and its new red and green monochrome color palettes will provide those with more sensitive eyes to avoid the “night blindness” that so many experience after long term viewing with a digital optic. Of course, these new features are integrated with many of the other great features that have become standard across AGM’s highly-technical product line: on board ballistic calculator, 1000yd laser rangefinder, on board video/audio recording, 64GB of internal storage, AGM Connect app compatibility, cold & warm viewing modes, 10 brightness & contrast settings, 9hr battery life between two internal batteries and (1) removable 18650 and a new 1.7in one-piece 30mm ADM Recon Mount ($200+ value). AGM – Vision Without Limits.
Warning: California's Proposition 65
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
$7,345.00
Quick Order
Add to cart
FIRMWARE UPDATE INSTRUCTION
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.
WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
Please check the latest firmware. Click the FW Version to download the firmware update package.
AGM EVOLVER LRF 1280, AGM Adder V2 LRF 35-384, AGM Adder V2 LRF 35-640, AGM Adder V2 LRF 50-640, AGM Adder V2 LRF 60-1280, AGM Spectrum LRF 4K
Firmware Versions:
KEY Feature Updates
1. Image Boost 3.0
Improved algorithm with reduced noise and enhanced target highlighting. (Only on AdderV2 now.)
2. Reticle & Ballistics
Thinner reticle for higher precision (with thinner reticle – reticle 6 & smaller dot – reticle 10).
All features, interface, and operation methods under the Zeroing menu are update to the latest.
Support the Reticle center color (4 colors).
Ballistic Calculation Updates. The BC function will move under the Zeroing menu. Add bullet types
(G1, G7, GS), aim point colors and types on Evolver and Spectrum.
BC supports pitch angle compensation. The device can automatically adjust the position of the BC
mark by reading the pitch angle data from the gyroscope and entering it into the algorithm
BC aim point is shrunk and reduces the obscuration of the target.
The BC aim point will be shown in the PIP view.
*Note: To prevent the large reticle in the PIP view from obscuring the target and the aim point, only
the reticle center will be retained in the PIP view, but reticle types 5, 6, and 10 will not be changed.
3. LRF Display: LRF reading now shows in the screen center and will disappear after 10 seconds.
If the distance measurement fails or cannot reach a valid value, “000” will be displayed.
The LRF display is different when the reticle is enabled and disabled to avoid obscuring the target.
b. Other updates
1. The folder name on PC will be updated from “DCIM” to “AGM Content.”
2. Update the boot screen and watermark to the new AGM logo.
3. OSD Icons Simplification: SD card capacity, zoom magnifier icon, and USB mode icon removed.
4. Support the Horizontal Distance measurement function.
5. Power Saving. The hotspot will automatically turn off if no connection for 10 minutes.
6. Only supports single ranging when ballistic calculations are enabled.
7. Add Zoom Mode function(AdderV2 and Spectrum LRF 4K). Step Zoom (1X, 2X, 4X, 8X) is now back.
Support switching between Step Zoom and Incremental Zoom
8. Support the Red and Green Monochrome palettes on Evolver.
9. Support the Channel Viewing Activation for 6 palettes on Evolver.
10. Update the option names in Scene Mode for Evolver and AdderV2. Change “Recognition” to
“General”; “Jungle” to “Compressed”.
11. Add a new language: Turkish.
12. Support the Diagnostic Log function.
13. Support the Reboot and Restore Factory Settings function. (Restore is renamed as Reboot)
14. SD card storage capacity will be displayed in the Version.
15. No scanning alert will pop up when the device is connected to the computer.
16. Optimize Evolver and AdderV2-1280 image horizontal lines problem.
17. Fix bugs, like the watermark exceeding the boundary on AdderV2-35mm.
Total Reviews (1)
click here write review to add review for this product.