This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
PART #ADDE35-640-2
0 reviews | Write a review
The AGM Adder V2 LRF is the next step in the evolutionary process in the AGM thermal riflescope lineup. Based off the ever-popular original 30mm AGM thermal scopes, the Adders, the V2’s will improve upon its predecessor in a number of ways, many of which come directly from our loyal customers.
The New AdderV2 LRF 35-640’s primary goal was to assimilate a feature which many electro-optics veterans end up looking at as a necessity, which is a fully integrated 1000yd laser rangefinder. And although the majority of units in the AdderV2 family will come with an integrated LRF and ballistic calculator, the AdderV2 35-640 will come equipped with the lowest base magnification and widest field of view of the entire bunch. Coming in at 2.5X, the 35-640 sits right in the sweet spot for hunters that find themselves appreciating the wider field of view when hunting large groups of feral hogs, but still has enough base magnification to make hunting predators in wide open fields comfortable as well.
Although the new internal LRF module is one of the major improvements in the new AdderV2’s, its certainly not the only one. Not to be outdone, the new 640x512/12 micron sensor comes in at an industry-leading sub-15mk sensitivity. And we didn’t just pair that new sensor with a common 1024 display, we’ve paired it with an intricate new 2560x2560 micro display and a new shutterless nuc. This display not only provides users with unrivaled image quality, but also with the new semi-circular internal user interface. This new interface will still comfortably provide shooters with the most crucial information, such as battery life, magnification level, range, time and vertical/horizontal pitch scale readout. This unit
also allows users to switch from full step zoom to 0.5X incremental zoom adjustments as well, so there’s no wasted sections of the magnification range. Other improvements include: new red & green monochrome color palettes, 64GB of internal storage capacity, 1000g recoil resistance, a fully integrated on board ballistic calculator, pitch scale activation, media albums which can be viewed on the device (not just your phone), internal 9hr rechargeable battery, cold & warm hue viewing modes, and more. And like the original Adder series scopes, the AdderV2’s will come with a field-proven American-made ADM one-piece Recon 30mm mount ($220 value) included. AGM – Vision Without Limits.
Warning: California's Proposition 65
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
$4,495.00
Quick Order
Add to cart
FIRMWARE UPDATE INSTRUCTION
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.
WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
Please check the latest firmware. Click the FW Version to download the firmware update package.
AGM EVOLVER LRF 1280, AGM Adder V2 LRF 35-384, AGM Adder V2 LRF 35-640, AGM Adder V2 LRF 50-640, AGM Adder V2 LRF 60-1280, AGM Spectrum LRF 4K
Firmware Versions:
KEY Feature Updates
1. Image Boost 3.0
Improved algorithm with reduced noise and enhanced target highlighting. (Only on AdderV2 now.)
2. Reticle & Ballistics
Thinner reticle for higher precision (with thinner reticle – reticle 6 & smaller dot – reticle 10).
All features, interface, and operation methods under the Zeroing menu are update to the latest.
Support the Reticle center color (4 colors).
Ballistic Calculation Updates. The BC function will move under the Zeroing menu. Add bullet types
(G1, G7, GS), aim point colors and types on Evolver and Spectrum.
BC supports pitch angle compensation. The device can automatically adjust the position of the BC
mark by reading the pitch angle data from the gyroscope and entering it into the algorithm
BC aim point is shrunk and reduces the obscuration of the target.
The BC aim point will be shown in the PIP view.
*Note: To prevent the large reticle in the PIP view from obscuring the target and the aim point, only
the reticle center will be retained in the PIP view, but reticle types 5, 6, and 10 will not be changed.
3. LRF Display: LRF reading now shows in the screen center and will disappear after 10 seconds.
If the distance measurement fails or cannot reach a valid value, “000” will be displayed.
The LRF display is different when the reticle is enabled and disabled to avoid obscuring the target.
b. Other updates
1. The folder name on PC will be updated from “DCIM” to “AGM Content.”
2. Update the boot screen and watermark to the new AGM logo.
3. OSD Icons Simplification: SD card capacity, zoom magnifier icon, and USB mode icon removed.
4. Support the Horizontal Distance measurement function.
5. Power Saving. The hotspot will automatically turn off if no connection for 10 minutes.
6. Only supports single ranging when ballistic calculations are enabled.
7. Add Zoom Mode function(AdderV2 and Spectrum LRF 4K). Step Zoom (1X, 2X, 4X, 8X) is now back.
Support switching between Step Zoom and Incremental Zoom
8. Support the Red and Green Monochrome palettes on Evolver.
9. Support the Channel Viewing Activation for 6 palettes on Evolver.
10. Update the option names in Scene Mode for Evolver and AdderV2. Change “Recognition” to
“General”; “Jungle” to “Compressed”.
11. Add a new language: Turkish.
12. Support the Diagnostic Log function.
13. Support the Reboot and Restore Factory Settings function. (Restore is renamed as Reboot)
14. SD card storage capacity will be displayed in the Version.
15. No scanning alert will pop up when the device is connected to the computer.
16. Optimize Evolver and AdderV2-1280 image horizontal lines problem.
17. Fix bugs, like the watermark exceeding the boundary on AdderV2-35mm.
Total Reviews (0)
click here write review to add review for this product.
Thermal Monoculars
Thermal Binoculars
Thermal Weapon Sights
Thermal Clip-On Systems
Thermal Accessories
Digital Weapon Sights
Digital Clip-On Systems
Night Vision Monoculars
Night Vision Binoculars
Night Vision Goggles
Night Vision Weapon Sights
Night Vision Clip-On Systems
AGM Image intensifier Tubes
Night Vision Accessories
Fusion Imaging Monoculars
Fusion Imaging Binoculars
Laser Systems
IR Lights
Helmets & Mounts
Weapon Mounts
Miscellaneous
SKD Kits
PVS 14 Spare Parts
PVS 7 Spare Parts
