Gen 3 P45 Non-Inverted MX10130 IIT FOM2000 Level 1

$0.00

AGM 10130 Series 18 mm Gen 3 Image Intensifiers are designed for use in all variants of the AN/PVS-7 type night vision goggles and night vision clip on systems. Each of these Image Intensifiers features a high-efficiency gallium arsenide photocathode bonded to a glass input window, a Microchannel Plate electron amplifier and P-43 (green) or P-45 (white) phosphor screen on a non-inverting fiberoptic output window. AGM IIT offers high signal-to-noise ratio and high resolution which in turn provide user with extended detection range along with excellent identification in low-light conditions. AGM IITs are equipped with Auto-Gated power supply for top performance in dynamic lighting environments.
AGM 10130 Series 18 mm Gen 3 Image Intensifiers can be used in night vision devices such as PVS-7, FoxBat-LE, Comanche-22, along with number of other systems available on consumer market. AGM 10130-F2000 IITs are designed to give optimal performance while being in compliance with FOM 2000 export requirements.

Warning: California's Proposition 65

Zone 1 - 0.295 inch diameter circle in center of optic.

Zone 2 - 0.295 to 0.580 inch annulus concentric with Zone 1.

Zone 3 - 0.580 to 0.710 inch annulus concentric with Zone 2.

Spot Size (in)	MAXIMUM SPOTS ALLOWED IN EACH ZONE
Spot Size (in)	Zone 1	Zone 2	Zone 3
> .009 or larger	0	0	0
> .006 - .009	0	1	1
.003 – .006	0	2	2
Total Spots	3 spots maximum allowed

Notes:

Dark spots less or equal to 0.003 in. are acceptable.
Dark spots are to be measured at 2E-4fc.
Bright spots from film holes less than 0.005 in. are acceptable.

Specifications

Battery Life:
Color Pallets:
Base Magnification:
Digitial Magnification Range:
Lens Size:
Field of View:
Display Resolution:
Detection Range:
Video/Photo Storage:
Battery Type:
Waterproof Rating:
Weight:
Refresh Rate:
Thermal Resolution:
NETD:
Pixel Pitch:

Thermal Resolution

Detection Range

Base Magnification

Lens Size

Run Time