This product is not exportable outside the United States.


By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.

close-icon

AGM ASP-MICRO TM384

Archive - Thermal Monoculars

PART #3093451001AM30

1 reviews | Write a review


Description And features


The Asp-Micro handheld observational thermal monocular is equipped with a 160×120 or 384×288 infrared detector and a 720×540 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness. The monocular is mainly applied to scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, antismuggling, criminal seizing, hiking, travel, and hunting, etc.


AGM ASP Micro Overview by Nicholas C. Read more at TheFirearmBlog


Warning: California's Proposition 65


FUNCTIONS:

Distance Measurement:
The device realizes distance measurement function after marking the top and bottom of target, and input the target height.
Hot Spot Mark:
The device detects and marks the hot spot of highest temperature.
Mode Switch:
Device supports pallet switch and distance measurement.
Storage:
Built-in memory module supports video recording/snapshot capturing.
Digital Zoom:
Device supports 1×, 2×,  4× and 8x digital zoom.
Wi-Fi Hotspot:
Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone.

Warning: California's Proposition 65

  • 160×120 or 384×288 resolution, high sensitivity detector
  • Adaptive AGC, DDE, 3D DNR
  • 720×540 resolution LCOS display
  • Built-in rechargeable Lithium battery
  • More than 7 hours continuous running (with Wi-Fi hotspot function off)
  • Wi-Fi hotspot
  • Type-C interface
  • 3-Year warranty
Characteristics

Detector type: Vanadium Oxide Uncooled Focal Plane Arrays

Refresh rate: 50 Hz

Resolution: 384x288

FOV: 24.7° x 18.7°

Package Includes
  • USB Cable
  • Wrist Strap
  • Packing Box
  • Operators Manual
  • Lens Tissue
  • EU Plug
Downloads
Export Restrictions:

Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.


Specifications


Digital Magnification
0.5x - 4x
Detector type
Vanadium Oxide Uncooled Focal Plane Arrays
Response Waveband
8μm to 14μm
FFC (Flat Field Correction)
Auto, Manual, External Correction
Highest Temperature Spot Tracking
Yes
Standby Mode
Yes
Refresh rate
50 Hz
Aperture
F1.0
Resolution
384×288
Recognition
(Vehicles: 1.4×4.0m) - 369m/yd (Humans: 1.8×0.5m) - 120m/yd
Detection Range (6' object)
(Vehicles: 1.4×4.0m) - 1479m/yd (Humans: 1.8×0.5m) - 482m/yd
Identification Range
(Vehicles: 1.4×4.0m) - 184m/yd (Humans: 1.8×0.5m) - 60m/yd
NETD
less than 35 mk (@25°C), F#=1.0
Lens (focal length)
15 mm
Field of view (H × X)
24.7° x 18.7°
Digital zoom
1×, 2×, 4×, 8x
Display
720×540, 0.2 inch, LCOS
Storage
Built-in memory module (8 GB)
Record Video
On-board video recording
Capture Snapshot
Yes
Battery Type
Built-in rechargeable Lithium battery
Wi-Fi
Yes
Battery Operating Time
More than 7 hours continuous running (with Wi-Fi hotspot function off)
Battery Capacity Display
Yes
Power supply
5 VDC/2 A, 1.5 W
Operating Temperature Range
-20°C to 55°C (-4°F to 131°F)
Weight
0.25 kg (0.55 lb)
Overall Dimensions
161 × 61 × 57 mm (6.3 × 2.4 × 2.2 in)
Protection Level
IP67
Magnification
0.5x

Firmware update


FIRMWARE UPDATE INSTRUCTION

Please read the instructions below before updating the firmware.

Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.

Download the firmware update package to your PC and unzip it.

NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.

  1. Connect the thermal device to your PC with USB cable.
  2. Turn on the thermal device.
  3. Disable the Wi-Fi Hotspot function in the device menu if WiFi is enabled.
  4. Open the detected disk (USB drive) in file manager program. Copy the unzipped .dav file and paste it to the root directory of the device.
  5. Turn off the device.
  6. Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription "Upgrading ...". The update process will be completed when the inscription "Upgrading ..." goes out. Repeat steps 4-6 for each updating file.
  7. Turn off the device and disconnect it from your PC.

WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.

If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.

Please check the latest firmware. Click the FW Version to download the firmware update package.

  • ASP-MICRO TM384 THERMAL MONOCULAR FIRMWARE

    Firmware Versions:


  • 100%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over AGM ASP-MICRO TM384

Total Reviews (1)
click here write review to add review for this product.