This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
0
0
PART #ADDE35-384-2
0 reviews | Write a review
The AGM AdderV2 is the next step in the evolutionary process in the AGM thermal riflescope lineup. Based off the ever-popular original 30 mm AGM thermal scopes, the Adders, the V2’s will improve upon its predecessor in a number of ways, many of which come directly from our loyal customers.
The New AdderV2 35-384 is a supercharged version of the tried-andtrue original Adder 35-384. Not only does it offer an incredible sensor upgrade, from sub-35mk to sub-15mk, but its also utilizes AGM’s first shutterless nuc system. Along with the new thermal sensor, the new micro display gets quite the upgrade as well. The original Adder 35-384 incorporated a 1024x768 display, which is now dramatically improved upon with its new 2560x2560 display, offering hunter’s a firsthand look at AGM’s first ever semi-circular display. It also raises the base magnification from the original model (2.5X) to a more robust 4X. What this means is, a slightly narrower field of view is traded out for crisper images at high magnification. Whereas original Adder 35-384 users had to twice cut their resolution in half by the time they had reached 10X, the new V2 will get you all the way to 16X before doing the same. Typically, a dramatically better image provided by upgraded thermal sensor and displays is enough, it only scratches the surface with all the new improvements that the V2 offers. These include: new red & green monochrome color palettes, 64GB of internal storage capacity, 1000g recoil resistance, display off tilt sensor, media albums which can be viewed on the device (not just your phone), internal 9hr rechargeable battery, a single removable 18650 rechargeable, cold & warm hue viewing modes, and more. And like the original Adder series scopes, the AdderV2’s will come with a field-proven American-made ADM one-piece Recon 30mm mount ($220 value) included. AGM – Vision Without Limits.
Warning: California's Proposition 65
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
$2,695.00
Quick Order
Add to cart
FIRMWARE UPDATE INSTRUCTION
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.
WARNING:
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
Please check the latest firmware. Click the FW Version to download the firmware update package.
AGM EVOLVER LRF 1280, AGM Adder V2 LRF 35-384, AGM Adder V2 LRF 35-640, AGM Adder V2 LRF 50-640, AGM Adder V2 LRF 60-1280, AGM Spectrum LRF 4K
Firmware Versions:
KEY Feature Updates
1. Image Boost 3.0
Improved algorithm with reduced noise and enhanced target highlighting. (Only on AdderV2 now.)
2. Reticle & Ballistics
Thinner reticle for higher precision (with thinner reticle – reticle 6 & smaller dot – reticle 10).
All features, interface, and operation methods under the Zeroing menu are update to the latest.
Support the Reticle center color (4 colors).
Ballistic Calculation Updates. The BC function will move under the Zeroing menu. Add bullet types
(G1, G7, GS), aim point colors and types on Evolver and Spectrum.
BC supports pitch angle compensation. The device can automatically adjust the position of the BC
mark by reading the pitch angle data from the gyroscope and entering it into the algorithm
BC aim point is shrunk and reduces the obscuration of the target.
The BC aim point will be shown in the PIP view.
*Note: To prevent the large reticle in the PIP view from obscuring the target and the aim point, only
the reticle center will be retained in the PIP view, but reticle types 5, 6, and 10 will not be changed.
3. LRF Display: LRF reading now shows in the screen center and will disappear after 10 seconds.
If the distance measurement fails or cannot reach a valid value, “000” will be displayed.
The LRF display is different when the reticle is enabled and disabled to avoid obscuring the target.
b. Other updates
1. The folder name on PC will be updated from “DCIM” to “AGM Content.”
2. Update the boot screen and watermark to the new AGM logo.
3. OSD Icons Simplification: SD card capacity, zoom magnifier icon, and USB mode icon removed.
4. Support the Horizontal Distance measurement function.
5. Power Saving. The hotspot will automatically turn off if no connection for 10 minutes.
6. Only supports single ranging when ballistic calculations are enabled.
7. Add Zoom Mode function(AdderV2 and Spectrum LRF 4K). Step Zoom (1X, 2X, 4X, 8X) is now back.
Support switching between Step Zoom and Incremental Zoom
8. Support the Red and Green Monochrome palettes on Evolver.
9. Support the Channel Viewing Activation for 6 palettes on Evolver.
10. Update the option names in Scene Mode for Evolver and AdderV2. Change “Recognition” to
“General”; “Jungle” to “Compressed”.
11. Add a new language: Turkish.
12. Support the Diagnostic Log function.
13. Support the Reboot and Restore Factory Settings function. (Restore is renamed as Reboot)
14. SD card storage capacity will be displayed in the Version.
15. No scanning alert will pop up when the device is connected to the computer.
16. Optimize Evolver and AdderV2-1280 image horizontal lines problem.
17. Fix bugs, like the watermark exceeding the boundary on AdderV2-35mm.
Total Reviews (0)
click here write review to add review for this product.