Become a part of our community!
Subscribe to our news and mailing lists and be aware of all the news and discounts. Our new promotions and opportunities will always be with you just a click away.
Join and live in the same rhythm with us!
This product is not exportable outside the United States.
By adding this item to cart, you agree and acknowledge the Export Policy and confirm that you are a person in the United States with no intentions to illegally export the device.
1 reviews | Write a review
The AGM Adder Thermal Riflescopes pack all the technology and advanced electronics into the historically familiar 30mm tube riflescope housing. The Adder TS35-640 pairs a 35mm Germanium lens with an upgraded sub-35mK 640x512 thermal detector and a 1024x768 OLED display, to provide one of the best images AGM has produced to date. The combination of the 12 micron sensor with the 35mm lens also places the base magnification for this unit right in the sweet spot in terms of flexibility for both hog and predator hunters, at 2X. This magnification level isn’t too high and restrictive on the hunter’s field of view and is simultaneously just high enough to ensure there isn’t too much resolution degradation when digitally zooming to 4X and 8X. Other enhancements include an astonishing 13 hours of battery life on two internal 18650 rechargeable batteries, 5 internal reticle options, and shot-activated video recording, which, when enabled, ensure that hunters forgetting to press the record button is a thing of the past!
The entire Adder product family also comes with a high-quality, one-piece, 30mm quick-detach mount from American Defense Manufacturing. These mounts allow for sliding the scope both forward and backwards to provide optimal eye relief for shooters using a wide array of different shooting platforms. Other features include, but aren’t limited to: 50 Hz refresh rate, IP67 waterproof rating, external power capability, 64GB of on-board memory, 5 different reticle options, Wi-Fi and AGM Connect app compatibility, multiple color palettes, audio recording, emergency CR123 battery power, and of course AGM’s 5 Year Transferable Warranty.
Warning: California's Proposition 65
Refresh rate: 50 Hz
FOV: 12.5° × 10.0°
Product shown herein is subject to US export regulations and may require a license prior to export. Any diversion contrary to US Government regulations is prohibited.
Battery life (operating at 20°С)
Up to 13 hr
Black Hot, White Hot, Red Hot, Fusion
5 types, 4 colors, on/off
0.22 mil / 0.73 MOA
Picture In Picture Mode (PIP)
Defective Pixels Correction (DPC)
Auto, Manual, External Correction
2x - 16x
12μm, Uncooled, 50 Hz, < 35 mK (25°C, F# = 1.0)
640 × 512
Detection Range (6' object)
35 mm; F/1.0
Field of view (H × X)
12.5° × 10.0°
1×, 2×, 4×, 8×
Diopter adjustment range
-5 to +5 dpt
≥ 60 mm
64 GB EMMC
Two 18650 Rechargeable Batteries (built-in) and one CR123 Battery
Yes (via USB)
5 VDC/2 A, USB Type-C Supports QC3.0
Operating Temperature Range
-30°C to +55°C (-22°F to +131°F)
Degree of Protection
890 g ( 1.96 lb)
407 × 78× 76 mm (16.0 × 3.1 × 3.0 in)
FIRMWARE UPDATE INSTRUCTION
Please read the instructions below before updating the firmware.
Check current firmware version of your device, for this go to your device’s main menu to option “Info” or “Version” and check what number you have. Compare the number with the latest version of the firmware on the AGM website.
Download the firmware update package to your PC and unzip it.
NOTE: Do not open the DAV or BIN file on your computer as it may corrupt the file.
If your device does not have a built-in rechargeable battery and is powered by replaceable Lithium batteries, remove the batteries from the battery compartment before connecting the device to your PC, or it may cause computer damage.
If you removed the batteries, please make sure the device is connected to the computer during the update process. Otherwise, the device will shut off and may cause unnecessary upgrade failure, firmware damage, etc.
Please check the latest firmware. Click the FW Version to download the firmware update package.
AGM ADDER TS35-640 / AGM ADDER TS50-640 THERMAL IMAGING SCOPES FIRMWARE
-Support 1-10 levels for brightness and contrast adjustment.
-Keep the reticle’s original position without jumping when zooming.
-Name change. Reticle Group->Zeroing Profiles, Reticle->Zeroing
-Delete the wheel button function: Press/switch reticle type. When you press the button, no change will occur, so as to avoild the misoperation.
- Basic version.