An operator-grade Holographic Weapon Sight built for close-quarter engagements with fast-moving targets,
our Model EXPS3™ HWS® delivers two eyes open shooting, 7mm raised base for lower iron sight access, and night vision capability.
Side buttons and an adjustable, quick-detach locking lever for easy installation and removal.
EOTECH’s unique reticle patterns are a critical to delivering fast target acquisition and MOA accuracy at any range. EOTECH reticles feature a 68 MOA ring surrounding a 1 MOA center dot allowing the shooter to quickly pick up and lock on a target.
-Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.
-Our two-dot reticle pattern can be easily distinguished with or without magnification and offers the benefit of an additional long-range, aiming dot. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. For ordering this reticle, the model codes will end in -2.
-Use this ballistic reticle with 5.56 Nato/.223 cal with 62 gr M855 FMJ at roughly 2,680 fps with a 14.5" barrel. For ordering this reticle, the model codes will end in -4. Aiming dots on the 4-dot reticle may not be distinguishable without magnification.
Warning: California's Proposition 65
1” Weaver or MIL-STD-1913 rail
1,000 continuous hours at nominal setting 12 at room temperature.
3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm)
Country of origin
Made in USA
20 daylight settings 10 additional settings for Gen I through III+ night vision devices
1 x CR123 battery
Water-Resistant 33 ft. (10 m) depth
11.2 oz (317.5 g)